Skip to content
CLN.io

Cyber / Automations / DYI

  • Cybersecurity
  • Automation
    • Automation
    • APIs
    • Home Assistant
    • HomeKit
    • Philips Hue
    • tines
    • Webhooks
  • IT
    • IT
    • Data
    • DNS
    • Miscellaneous
    • Monitoring
    • Networking
    • Raspberry
  • AI
    • AI
    • LLM
  • DYI
    • DYI
    • 3Dprinting
  • Health
  • Drone
  • Privacy
  • [Privacy Policy]

Category: DYI

Posted on 16/02/202317/02/2023 by CLN

Adding a SwitchBot Bot to HomeKit (with Home Assistant)

We will explore the way to add a switchbot to homekit using home assistantthis does not require a SwitchBot Hub (Mini), it uses direct bluetooth communication On this page Adding the SwitchBot to home assistant […]

Read the Post Adding a SwitchBot Bot to HomeKit (with Home Assistant)
Posted on 17/11/202230/11/2022 by CLN

Adding a ADXL345 accelerometer to a Creality 3 S1 (Pro)

as an alternative to the creality sonic pad Klipper has built-in support for ADXL345 accelerometer, which can be used to measure resonance frequencies of the printer for different axes, and auto-tune input shapers to compensate for resonances. […]

Read the Post Adding a ADXL345 accelerometer to a Creality 3 S1 (Pro)
Posted on 14/10/202230/11/2022 by CLN

Flashing a Creality 3 S1 pro with Klipper and use it with MainSails

I’ve recently acquired a Creality 3 S1 pro, with the intention of flashing it with Klipper If this is the first time flashing a printer with klipper read me: these are my notes. On this […]

Read the Post Flashing a Creality 3 S1 pro with Klipper and use it with MainSails
Posted on 18/10/202101/12/2022 by CLN

Extending a Philips Ambilight with Philips hue LED strips behind KALLAX cabinets (+ 2 hue plays)

A Philips Ambilight can connect to Philips Hue lights. We put down 4 KALLAXes next to one another (2×2 kallax units), but it always felt like a dark place so when I wanted to add […]

Read the Post Extending a Philips Ambilight with Philips hue LED strips behind KALLAX cabinets (+ 2 hue plays)
Posted on 16/10/202101/12/2022 by CLN

Ramping up an air purifier when 3D printing

Setting a Philips air purifier AC3829 to turbo mode with home assistant when my 3D printer prints (a Prusa mini) My Prusa mini printer is sitting in my home office, so when it’s printing for […]

Read the Post Ramping up an air purifier when 3D printing

Recent Posts

  • Mattermost Bridge: Consolidating Messages from Multiple External Servers
  • Failed setup, will retry: Access to /config/file.txt is not allowed.
  • Passing ITIL 4 foundation in a few days
  • Migrating Home Assistant from a Raspberry pi 4 to an RPI5 (optional: with a PoE injector)
  • OpenWebUI giving users access to the promp tab

Recent Comments

  • Claire on Updating / Upgrading the magimix cook expert firmware from 2.01S to 4.00F (new features!) only available on the french website (2022)
  • DrTivol on Play a barking dog sound on your HomePod when there is motion outside of your door with HomeKit (Alarm)
  • CLN on Forcing DNS requests over AdGuard / Pi-hole with an Ubiquiti EdgeRouter firewall
  • gaston on Forcing DNS requests over AdGuard / Pi-hole with an Ubiquiti EdgeRouter firewall

Archives

  • July 2025
  • April 2025
  • March 2025
  • February 2025
  • October 2024
  • September 2024
  • August 2024
  • July 2024
  • December 2023
  • October 2023
  • July 2023
  • June 2023
  • May 2023
  • February 2023
  • January 2023
  • December 2022
  • November 2022
  • October 2022
  • September 2022
  • August 2022
  • July 2022
  • March 2022
  • February 2022
  • November 2021
  • October 2021

Categories

  • 3Dprinting
  • AI
  • APIs
  • automation
  • cyber security
  • Data
  • DNS
  • Drone
  • DYI
  • health
  • Home Assistant
  • HomeKit
  • IT
  • LLM
  • Miscellaneous
  • Monitoring
  • Networking
  • Philips Hue
  • privacy
  • Raspberry
  • tines
  • Uncategorized
  • webhooks

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org
CLN.io

Cyber / Automations / DYI

COPYRIGHT © 2025 - CLN.io // Designed By - ZeeTheme