Author: CLN
NOTE: No LLMs were used to write this blog post Basically the same procedure as migrating-home-assistant-from-sd-card-to-ssdfollow every step. I ran into an issue as I’m using a PoE injector, and the Pi 5 complains about […]
Issue Recently I encountered a question from a user that was switched from a OpenWebUI admin to user, but lost access to the prompts tab. I googled around but found little, so heres hoping this […]
NOTE: No LLMs were used to write this blog post As fiber is available to me now (5Gbps) I’ve build a new homelab for 2025.As I share my office with my homelab I purchased a […]
little writedown NOTE: No LLMs were used to write this blog post Hardware setup Just sharing for the curious, if you are even more curious see my current homelab NOTE: make sure your offsite synology […]
Not really meant as a blog post, more like a note to myself in the future NOTE: Claude 3.5 was used to create the overview table, otherwise no LLMs were used to generate this blog […]
Empowering SOC Analysts through AI NOTE: This content is from my experiences until October 2024, LLM’s might evolve and no longer need these tips & tricks.No LLMs were used to generate this blog post or […]
The problem As much as I like Tines (deployed on-premise) their self-hosted metrics/statistics could use some improvements, there is no 1-to-1 link or view between stories and their sizes in the database (events + payloads) […]
NOTE: I wrote this blogpost with Claude Sonet 3.5 I want to share a lambda function I’ve built that might prove incredibly useful for your future projects. This function generates the exact start and end […]
Get portainer running Go to your primary environment Go to stacks and add a stack Use the web editor and let’s add our service https://github.com/sdr-enthusiasts/airspy_adsb The main change I had to do was to change […]
Recent Comments