NOTE: No LLMs were used to write this blog post Basically the same procedure as migrating-home-assistant-from-sd-card-to-ssdfollow every step. I ran into an issue as I’m using a PoE injector, and the Pi 5 complains about […]
NOTE: No LLMs were used to write this blog post Basically the same procedure as migrating-home-assistant-from-sd-card-to-ssdfollow every step. I ran into an issue as I’m using a PoE injector, and the Pi 5 complains about […]
Issue Recently I encountered a question from a user that was switched from a OpenWebUI admin to user, but lost access to the prompts tab. I googled around but found little, so heres hoping this […]
NOTE: No LLMs were used to write this blog post As fiber is available to me now (5Gbps) I’ve build a new homelab for 2025.As I share my office with my homelab I purchased a […]
little writedown NOTE: No LLMs were used to write this blog post Hardware setup Just sharing for the curious, if you are even more curious see my current homelab NOTE: make sure your offsite synology […]
Not really meant as a blog post, more like a note to myself in the future NOTE: Claude 3.5 was used to create the overview table, otherwise no LLMs were used to generate this blog […]
Recent Comments