Skip to content
CLN.io

Cyber / Automations / DYI

  • Cybersecurity
  • Automation
    • Automation
    • APIs
    • Home Assistant
    • HomeKit
    • Philips Hue
    • Webhooks
  • IT
    • IT
    • DNS
    • Monitoring
    • Networking
    • Raspberry
  • DYI
    • DYI
    • 3Dprinting
  • Health
  • Drone
  • Privacy
  • [Privacy Policy]

Category: Raspberry

Posted on 16/09/202217/09/2022 by CLN

Raspberry Pi 3 or 4 passive cooling with an Aluminium Case

I’ve used no cases, fan cooled cases for my raspberries, but they run hot, and fans break down. Most recently I had a fan of a PI break 2000Km away from me, so that was […]

Read the Post Raspberry Pi 3 or 4 passive cooling with an Aluminium Case
Posted on 16/09/202230/11/2022 by CLN

Tracking, monitoring host RPI CPU temperature with Home Assistant

Most Linux systems give you the current temperature of the CPU when you read the file. /sys/class/thermal/thermal_zone0/temp You will get a single line of text with the temperature as an Integer. So you have to divide […]

Read the Post Tracking, monitoring host RPI CPU temperature with Home Assistant
Posted on 10/09/202212/09/2022 by CLN

How to reboot Home Assistant Hypervisor (Hassio / HassOS) after the new UI update

Some settings/buttons were shuffled around in a UI overhaul You can find the reboot host under: Settings > System > Hardware > Reboot Host

Read the Post How to reboot Home Assistant Hypervisor (Hassio / HassOS) after the new UI update
Posted on 09/09/202219/01/2023 by CLN

Migrating Home Assistant from SD card to SSD on a raspberry pi 4

Moving an SD card install to SSD for Home Assistant on a raspberry pi 4 Steps to take On this page Before we start: Make sure you have a working adapter for your SSD to […]

Read the Post Migrating Home Assistant from SD card to SSD on a raspberry pi 4
Posted on 07/09/202230/11/2022 by CLN

Updating the bootloader on a RPI Raspberry Pi with an SD card / Raspberry Pi Imager / (no need for raspi-config)

You don’t need to install a full-fledged OS with raspi-config to update the bootloader!A simple SD card and the Raspberry Pi imager can do it within a minute. Steps to take On this page Updating […]

Read the Post Updating the bootloader on a RPI Raspberry Pi with an SD card / Raspberry Pi Imager / (no need for raspi-config)

Recent Posts

  • Edgerouter / Vyatta Static IP Mapping Converter to OpenWRT / LuCI
  • Using the OVH API (OVHcloud) with Tines
  • Monitoring web services availability with Tines
  • Adding a SwitchBot Bot to HomeKit (with Home Assistant)
  • Remote power cycling a UPS with HomeAssistant and NUT 🥜

Recent Comments

  • Claire on Updating / Upgrading the magimix cook expert firmware from 2.01S to 4.00F (new features!) only available on the french website (2022)
  • DrTivol on Play a barking dog sound on your HomePod when there is motion outside of your door with HomeKit (Alarm)
  • CLN on Forcing DNS requests over AdGuard / Pi-hole with an Ubiquiti EdgeRouter firewall
  • gaston on Forcing DNS requests over AdGuard / Pi-hole with an Ubiquiti EdgeRouter firewall

Archives

  • May 2023
  • February 2023
  • January 2023
  • December 2022
  • November 2022
  • October 2022
  • September 2022
  • August 2022
  • July 2022
  • March 2022
  • February 2022
  • November 2021
  • October 2021

Categories

  • 3Dprinting
  • APIs
  • automation
  • cyber security
  • DNS
  • Drone
  • DYI
  • health
  • Home Assistant
  • HomeKit
  • IT
  • Monitoring
  • Networking
  • Philips Hue
  • privacy
  • Raspberry
  • Uncategorized
  • webhooks

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org
CLN.io

Cyber / Automations / DYI

COPYRIGHT © 2023 - CLN.io // Designed By - ZeeTheme